高烈度地震区隧道软硬围岩交接段刚柔并济抗减震技术研究*

为提高高烈度地震区隧道抗震性能，以某铁路隧道为研究背景，分析3种抗减震措施下隧道不同监测点隧道拱顶沉降、边墙收敛、衬砌结构PGA及最小安全系数，通过对比分析得到最优抗减震措施。结果表明:相比于工况1，工况2隧道拱顶沉降减小10.54%~81.10%，边墙收敛减小13.92%~78.77%，衬砌结构PGA减小31.42%~72.02%，最小安全系数增加18.04%~66.13%；相比于工况1，工况3结构拱顶沉降减小3.04%~18.02%，边墙收敛减小4.70%~32.00%，PGA增加13.95%~27.48%，最小安全系数增加7.49%~30.99%；工况4即“减震层+SFRC衬砌”刚柔并济法，相比于工况1，隧道拱顶沉降减小18.46%~83.98%，结构边墙收敛减小17.54%~85.47%，PGA减小30.00%~69.98%，最小安全系数增加47.95%~83.56%；4种工况抗减震性能由高到低依次为:工况4＞工况2＞工况3＞工况1。研究结果可为隧道软硬围岩交接段抗震设防提供理论参考。     

燃煤电厂大气污染物排放考核时间间隔的建议

新的《火电厂大气污染物排放标准》和新《环境保护法》实施后，燃煤火电企业的依法治企自觉性不断提高，但由于不同的环保管理文件对超标处罚依据和处罚手段不同，造成政府对企业处罚的自由裁量权加大，对企业造成一定的压力与困惑。结合企业实际运行情况对燃煤电厂大气污染物排放考核时间间隔提出建议。     

中国土壤环境监测方法现状、问题及建议

综述了目前中国现行的土壤环境监测国家标准方法和环保、农业、林业等行业标准方法,指出国家标准和环保行业标准方法侧重于土壤污染物的检测,而农业和林业标准方法侧重于土壤营养元素及其有效态、理化指标的检测。针对现行标准方法存在的一些问题(如检测的土壤污染物种类少、部分方法先进性不足、土壤环境监测的基础研究薄弱以及方法的标准化尚待完善等),提出加强土壤监测标准方法的顶层设计、合理增加土壤污染物的控制种类,及时更新方法、发展多组分测定方法,加强标准方法研究的系统性、协调性,以及逐步增加原位监测标准方法等建议,为土壤监测技术的发展提供借鉴和参考。     

非柔性连接石化储罐配管温差应力分析与对策

储罐配管在温差作用下产生热位移会导致管壁产生热应力，未采用柔性连接的配管由于热应力集中作用可能发生破漏。针对与石油化工储罐非柔性连接的配管的安全问题，应用ANSYS有限元分析软件模拟计算石化企业典型配管的热应力分布；根据不同类型配管的分析结果，提出了工程技术与管理方面的针对性安全措施。研究结果表明:温差效应对石化储罐配管热应力影响显著，随内外温差的增加，配管应力集中的区域增大，最大热应力值增大；补偿措施能够改善配管的柔性，降低配管应力；约束载荷限制配管热膨胀从而增大配管应力；三通管是多根配管接合的区域，这种复杂管道交汇处会形成明显应力集中。研究结果对于提高石油化工非柔性连接配管安全性有一定的指导意义。     

煤与瓦斯共采在错层位巷道布置中的机理研究及应用构想

为了完善现有煤与瓦斯共采技术，创新煤与瓦斯共采方法，对错层位巷道布置下的煤与瓦斯共采系统展开研究，利用相似模拟试验，分析错层位巷道布置覆岩运动情况，预测其开采围岩裂隙发育和瓦斯运移形式，提出了创新煤与瓦斯共采技术构想。研究结果表明:采空区覆岩三带高度随接续工作面的增加而增大，相邻采空区垮落矸石压实区呈现“O-L-O”形变化，多个相邻采空区覆岩出现大“O”形圈裂隙带；相邻采空区内瓦斯可实现相互运移，大“O”形圈裂隙带内赋存大量瓦斯气体；研究提出了地面钻井抽采瓦斯、走向高位瓦斯抽采巷和外错尾巷穿层钻孔3种煤与瓦斯共采技术，比传统巷道布置情况下的煤与瓦斯共采技术在安全、经济等方面更具优势。     

Mitigating Impact of Devils Lake Flooding on the Sheyenne River Sulfate Concentration

Devils Lake is a terminal lake located in northeast North Dakota. Because of its glacial origin and accumulated salts from evaporation, the lake has a high concentration of sulfate compared to the surrounding water bodies. From 1993 to 2011, Devils Lake water levels rose by ~10 m, which flooded surrounding communities and increased the chance of an overspill to the Sheyenne River. To control the flooding, the State of North Dakota constructed two outlets to pump the lake water to the river. However, the pumped water has raised concerns about of water quality degradation and potential flooding risk of the Sheyenne River. To investigate these perceived impacts, a Soil and Water Assessment Tool (SWAT) model was developed for the Sheyenne River and it was linked to a coupled SWAT and CE‐QUAL‐W2 model that was developed for Devils Lake in a previous study. While the current outlet schedule has attempted to maintain the total river discharge within the confines of a two‐year flood (36 m³/s), our simulation from 2012 to 2018 revealed that the diversion increased the Sheyenne River sulfate concentration from an average of 125 to >750 mg/L. Furthermore, a conceptual optimization model was developed with a goal of better preserving the water quality of the Sheyenne River while effectively mitigating the flooding of Devils Lake. The optimal solution provides a “win–win” outlet management that maintains the efficiency of the outlets while reducing the Sheyenne River sulfate concentration to ≤600 mg/L.     

"十三五"国家自然科学基金对能源环境管理领域的资助状况和趋势

能源环境管理是各界关注的热点话题,也是科学研究的重要方向.以国家自然科学基金资助能源环境管理领域的科研项目为基础数据信息,本文重点分析了"十三五"期间国家自然科学基金在该领域资助项目的总体特征、研究主题和热点变化,并结合新时代科学基金资助导向提出了可能的发展趋势.主要结论包括:①能源环境管理领域面上、青年、地区等自由探索类项目的立项绝对数和学科占比均呈上升趋势,并更多向青年学者倾斜,资助强度保持稳定;②碳、能源和环境是自由探索项目中出现频率最高的热词,与之相关的研究主题随着政策等调整具有动态变化特征;③能源环境管理领域重点、重大等引导类项目和优青、杰青、创新研究群体等人才类项目不断实现突破,增速明显,学科占比优势突出;④问题导向与本土情景、理论体系和一般规律、学科交叉融合,以及市场和微观主体作用是研究选题确立与项目申请时可能需要重点关注的方向.     

模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

基于EFDC的长江常州段污水排江浓度场数值模拟

长江感潮河段水流与污染排放引起的浓度场复杂多变,基于EFDC(Environmental Fluid Dynamic Code)模型,采用正交曲线网格拟合自然河道边界,建立了长江常州段的水动力和水质模型。采用现场同步实测资料,与计算结果比对,证明该模型在水动力和水质两个方面都与实测数据吻合较好,满足了实际工程的需要;同时由于长江水流运动较快,一阶降解动力学已经满足了化学需氧量(COD)、氨氮(NH3-N)和总磷(TP)浓度计算要求,可以不考虑它们复杂的生化反应过程。     

PLS-based EWMA fault detection strategy for process monitoring

Fault detection (FD) and diagnosis in industrial processes is essential to ensure process safety and maintain product quality. Partial least squares (PLS) has been used successfully in process monitoring because it can effectively deal with highly correlated process variables. However, the conventional PLS-based detection metrics, such as the Hotelling's T² and the Q statistics are ill suited to detect small faults because they only use information from the most recent observations. Other univariate statistical monitoring methods, such as the exponentially weighted moving average (EWMA) control scheme, has shown better abilities to detect small faults. However, EWMA can only be used to monitor single variables. Therefore, the main objective of this paper is to combine the advantages of the univariate EWMA and PLS methods to enhance their performances and widen their applicability in practice. The performance of the proposed PLS-based EWMA FD method was compared with that of the conventional PLS FD method through two simulated examples, one using synthetic data and the other using simulated distillation column data. The simulation results clearly show the effectiveness of the proposed method over the conventional PLS, especially in the presence of faults with small magnitudes.